Control Flow, Inc. is a registered vendor to the U.S. Government "SAM" with registration managed by USFCR.

Control Flow, Inc. has designed, manufactured and installed a Heave Compensator System for the launch and recovery of a Submersible ROV.

Control Flow, Inc. has introduced a new line of Trunnion Mounted Ball Valves to compliment its Pipeline and Cavern Storage Valve product line.

To our valued customers, suppliers and associates:

During this COVID-19 pandemic virus that is impacting our global community, Control Flow, Inc. continues to operate as a responsible Employer and a good Corporate Citizen in our community. We are following city,state and federal guidelines and CDC recommendations which are reviewed daily as appropriate for our company, employees, customers, their family and the community.

Control Flow,Inc. will continue to review and update our communications, travel advisories, and our on site-specific response plans, based on available information as applicable. CFI has already taken certain precautions to help keep everyone safe from the Coronavirus and any other viruses that impact employee health.

Here is what we at Control Flow, Inc.are doing:

Control Flow, Inc.Office and Manufacturing Facilities

• Any Employee who is physically okay, but who has had contact with an immediate family member who has symptoms of COVID-10 will not be allowed to enter our facilities until both that employee and their family member have been medically cleared with a Doctor' release.
• Any Employee who has had contact with a person or family member who has tests positive for COVID-19, will not be allowed to enter our facility for a minimum of two
• Any Employee who has symptoms of acute respiratory illness (difficulty breathing) are not allowed to enter our facility until they do not have a fever (100.4° F / 38° C or greater using an oral thermometer) for at least 24 hours, without the use of medicine to reduce fever (for example, aspirin, acetaminophen, ibuprofen,etc.) or other medicines to reduce symptom (e.g. cough medicine).
• Initiating deeper levels of cleaning throughout our facility.
• Communicating virus protection messages through emails, texts or postings as they change or become available.
• Control Flow, I will continue to comply with federal, state, and local requirements as appropriately.

TRAVEL IS HIGHLY DISCOURAGED

Our California Office moves to our Headquarters in Houston, Texas!

 9201 Fairbanks N. Houston Rd. 
 Houston, Texas 77064-6206

 Phone: 281.890.8300
 Fax: 281.890.3947

 Email: sales@controlflow.com

Control Flow Inc. is proud to announce our sponsorhsip of UH Cullen College Engineering students in their advancement as finalists in NASA’s 2019 Special Edition: Moon to Mars Ice & Prospecting Challenge.

As stated in UH Cullen College Engineering's article "Control Flow Inc., ... made extensive in-kind donations of materials and parts for the project."

Full Article

Made in the USA, Control Flow's new Type E expanding gate and Type S solid gate Pipeline and Cavern Storage Valves will be introduced at the 2018 Offshore Technology Conference at Control Flow's booth #3331. Meeting the requirements of API 6D, these new valves are manufactured in and utilize all materials originating in the U.S.A. Based upon field proven design features these valves provide dependable Bi-Directional sealing capabilities utilizing both TFE-To-Metal and Metal-To-Metal Seat Seals; are corrosion resistance; ensure long life; and offer flexibility whether incorporating the solid gate (Type S) or parallel expanding two piece wedged gate (Type E).

These valves are currently available for both Class 600 and 900 service, in sizes from 4" to 10" and in Temperature Ranges of -20 to 350 degrees F (-29-177degrees C). For ease of operation, either the Type E or Type S valves are available in manual hand wheel operated, Bevel Gear Operated, Hydraulic Operated or Pneumatic Operated configurations. Sizes in 12" to 20" are presently in development by Control Flow, Inc. and will be available in the future.

Control Flow, Inc. Meeting Your Pipeline and Storage Valve Needs Worldwide

More Info

Overview

CFI through its U.S. facilities in Houston, TX and Moore, OK plus its network of Authorized Repair Facilities around the world can provide inspection and repair of BOP’s and manifolds inaccordance with CFI and API standards (6A Sect. 53 for manifolds and 16AR for BOP’s) as applicable for required 5-Year Maintenance and issue a Certificate of Compliance for such work.This service is available for CFI manufactured equipment as well as that of other OEM’s which will then be “Rebranded” as CFI equipment. Upon completion of the 5-Year maintenance work by CFI or one of its Authorized Repair Facilities, a Certificate of Compliance and Data Book will be issuedby CFI for the equipment.

For other OEM equipment to qualify for this service and “Rebranding”, it must not originate from China or India and CFI must be provided a copy of the equipment’s original DATA BOOK from the OEM.

The specifics of the 5-Year Maintenance Program are contained in the CFI Operations and Maintenance Manuals under “Maintenance”. All work, whether performed by CFI itself or one of its Authorized Repair Facilities is under the control and approval of CFI and performed in accordance with applicable CFI API standards. There are specific requirements for CFI Authorized Repair Facilities that must be followed and completed including the final inspection of all work details and records by CFI in order that a C of C and Data book be issued.

View Full Description

Download

Control Flow, Inc. maintains the latest certifications to ensure quality, safe and functional products.

Certifications: ISO 9001:2015, API 6A, API 6D, API 7-1, API 16A, API 16C, API 17D, ASME – MANUFACTURE OF PRESSURE VESSELS “U” Stamp, ASME – FABRICATION & ASSEMBLY OF PRESSURE PIPING “PP” Stamp, and NATIONAL BOARD OF BOILER & PRESSURE VESSELS INSPECTORS (REPAIR) “R” Stamp

VIEW CERTIFICATIONS

VIEW PATENTS